f d p f d 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 voltage capacitance lot no. trade mark x2 10 16v (mm) p 0.5 f d laminated case 5.2 max . 15 min 4 min f d + 0.5max aluminum electrolytic capacitors mj series 5.2mml max. 5.2mml max. height. adapted to the rohs directive (2002/95/ec). radial lead type type numbering system (example : 25v 10 f) u 1 m 2 j 3 1 4 e 5 1 6 0 7 0 8 m 9 d 10 l 11 configuration capacitance tolerance ( 20%) rated capacitance (10f) rated voltage (25v) series name type f d 4 ~ 6.3 code dl specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tan stability at low temperature endurance shelf life marking performance characteristics item 40 ~ +85? 4 ~ 50v 0.1 ~ 220 f 20% at 120hz, 20? after 2 minutes' application of rated voltage, leakage current is not more than 0.01cv or 3 ( a), whichever is greater. black print on the case top. measurement frequency : 120hz, temperature : 20? measurement frequency : 120hz after 1000 hours' application of rated voltage at 85?, capacitors meet the characteristic requirements listed at right. after storing the capacitors under no load at 85? for 1000 hours, and after performing voltage treatment based on jis c 5101-4 clause 4.1 at 20?, they will meet the specified value for endurance characteristics listed above. rated voltage (v) tan (max.) z 25? / z+20? z 40? / z+20? rated voltage (v) impedance ratio zt / z20 (max.) 6.3 0.26 4 0.35 10 0.20 16 0.16 25 0.14 35 0.12 50 0.12 4 7 15 6.3 4 8 10 3 8 16 2 4 25 2 4 35 2 3 50 2 3 dimensions rated ripple (marms) at 85? 120hz voltage mark for 6.3v is [6v]. 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 0r1 r22 r33 r47 010 2r2 3r3 4r7 100 220 330 470 101 221 4 4 5 6.3 28 33 56 96 0g 4 0j 6.3 1a 10 1c 16 1e 25 1v 35 1h 50 4 5 5 6.3 28 37 45 70 5 5 6.3 33 41 52 4 5 6.3 6.3 23 37 49 58 4 5 6.3 6.3 16 27 42 52 4 5 6.3 18 29 46 4 4 4 4 4 4 4 5 6.3 1.0 2.0 2.8 4.0 8.4 13 17 20 33 rated ripple v cap.( f) code capacitance change leakage current tan within 20% of initial value 200% or less of initial specified value initial specified value or less please refer to page 21, 22, 23 about the formed or taped product spec. please refer to page 3 for the minimum order quantity. frequency coefficient of rated ripple current coefficient frequency 50 hz 120 hz 300 hz 1 khz 10 khz ~ 0.70 1.00 1.17 1.36 1.50 case size d (mm) mj sa ? sr smaller ma cat.8100v
|
